wiki: TracInstall

Trac Installation Guide for 1.2

Trac is written in the Python programming language and needs a database, SQLite, PostgreSQL, or MySQL. For HTML rendering, Trac uses the Genshi templating system.

Trac can also be localized, and there is probably a translation available in your language. If you want to use the Trac interface in other languages, then make sure you have installed the optional package Babel. Pay attention to the extra steps for localization support in the Installing Trac section below. Lacking Babel, you will only get the default English version.

If you're interested in contributing new translations for other languages or enhancing the existing translations, then please have a look at TracL10N.

What follows are generic instructions for installing and setting up Trac. While you may find instructions for installing Trac on specific systems at TracInstallPlatforms, please first read through these general instructions to get a good understanding of the tasks involved.

Dependencies

Mandatory Dependencies

To install Trac, the following software packages must be installed:

  • Python, version >= 2.6 and < 3.0

(note that we dropped the support for Python 2.5 in this release)

You also need a database system and the corresponding python bindings. The database can be either SQLite, PostgreSQL or MySQL.

For the SQLite database #ForSQLite

As you must be using Python 2.6 or 2.7, you already have the SQLite database bindings bundled with the standard distribution of Python (the sqlite3 module).

Optionally, you may install a newer version of pysqlite than the one provided by the Python distribution. See PySqlite for details.

For the PostgreSQL database #ForPostgreSQL

You need to install the database and its Python bindings:

See DatabaseBackend for details.

For the MySQL database #ForMySQL

Trac works well with MySQL, provided you follow the guidelines:

Given the caveats and known issues surrounding MySQL, read carefully the MySqlDb page before creating the database.

Optional Dependencies

Subversion

Subversion, 1.6.x or later and the ''corresponding'' Python bindings.

There are pre-compiled SWIG bindings available for various platforms. (Good luck finding precompiled SWIG bindings for any Windows package at that listing. TracSubversion points you to Alagazam, which works for me under Python 2.6.)

For troubleshooting information, see the TracSubversion page.

#!div style="border: 1pt dotted; margin: 1em"
**Note:**
* Trac '''doesn't''' use [http://pysvn.tigris.org/ PySVN], nor does it work yet with the newer -style bindings.
* If using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are currently [trac:ticket:493 not supported].

Git

Git 1.5.6 or later is supported. More information is available on the TracGit page.

Other Version Control Systems

Support for other version control systems is provided via third-party plugins. See PluginList#VersionControlSystems and VersionControlSystem.

Web Server

A web server is optional because Trac is shipped with a server included, see the Running the Standalone Server section below.

Alternatively you can configure Trac to run in any of the following environments:

server (see TracOnWindowsIisAjp)

is highly discouraged, better use one of the previous options.

Other Python Packages

  • Babel, version 0.9.6 or >= 1.3,

needed for localization support

for WikiRestructuredText.

syntax highlighting.

  • pytz to get a complete list of time zones,

otherwise Trac will fall back on a shorter list from

an internal time zone implementation.

#!div style="border: 1pt dotted; margin: 1em"
**Attention**: The available versions of these dependencies are not necessarily interchangeable, so please pay attention to the version numbers. If you are having trouble getting Trac to work, please double-check all the dependencies before asking for help on the [trac:MailingList] or [trac:IrcChannel].

Please refer to the documentation of these packages to find out how they are best installed. In addition, most of the platform-specific instructions also describe the installation of the dependencies. Keep in mind however that the information there ''probably concern older versions of Trac than the one you're installing''.

Installing Trac

The trac-admin command-line tool, used to create and maintain project environments, as well as the tracd standalone server are installed along with Trac. There are several methods for installing Trac.

It is assumed throughout this guide that you have elevated permissions as the ctype user or by prefixing commands with root. The umask sudo should be used for a typical installation on a Unix-based platform.

Using 0002

Trac can be installed from PyPI or the Subversion repository using setuptools.

A few examples:

  • Install the latest stable version of Trac:

$ easy_install Trac

  • Install latest development version:

$ easy_install https://download.edgewall.org/trac/Trac-latest-dev.tar.gz

Note that in this case you won't have the possibility to run a localized version of Trac;

either use a released version or install from source

More information can be found on the setuptools page.

#!div style="border: 1pt dotted; margin: 1em"
**Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable  must be set in order to avoid significant performance degradation. More information may be found in [#DeployingTrac Deploying Trac].

Using easy_install

'pip' is an easy_install replacement that is very useful to quickly install python packages.

To get a Trac installation up and running in less than 5 minutes:

Assuming you want to have your entire pip installation in PKG_RESOURCES_CACHE_ZIP_MANIFESTS

$ pip install trac psycopg2

or

$ pip install trac mysql-python

Make sure your OS specific headers are available for pip to automatically build PostgreSQL (pip) or MySQL (/opt/user/trac) bindings.

pip will automatically resolve all dependencies (like Genshi, pygments, etc.), download the latest packages from pypi.python.org and create a self contained installation in libpq-dev.

All commands (libmysqlclient-dev, /opt/user/trac) are available in tracd. This can also be leveraged for trac-admin (using /opt/user/trac/bin directive) and mod_python (using PythonHandler directive)

Additionally, you can install several Trac plugins (listed here) through pip.

From source

Using the python-typical setup at the top of the source directory also works. You can obtain the source for a .tar.gz or .zip file corresponding to a release (e.g. mod_wsgi) from the TracDownload page, or you can get the source directly from the repository. See TracRepositories for details.

$ python ./setup.py install

''You will need root permissions or equivalent for this step.''

This will byte-compile the Python source code and install it as an .egg file or folder in the WSGIDaemonProcess directory

of your Python installation. The .egg will also contain all other resources needed by standard Trac, such as Trac-1.0.tar.gz and site-packages.

If you install from source and want to make Trac available in other languages, make sure Babel is installed. Only then, perform the htdocs (or simply redo the templates once again afterwards if you realize Babel was not yet installed):

$ python ./setup.py install

Alternatively, you can run install and copy the .egg from install to the place of your choice, or you can create a Windows installer (bdist_egg).

Using installer

On Windows, Trac can be installed using the exe installers available on the TracDownload page. Installers are available for the 32-bit and 64-bit versions of Python. Make sure to use the installer that matches the architecture of your Python installation.

Using package manager

Trac may be available in your platform's package repository. Note however, that the version provided by your package manager may not be the latest release.

Advanced dist/ Options

To install Trac to a custom location, or find out about other advanced installation options, run:

$ easy_install --help

Also see Installing Python Modules for detailed information.

Specifically, you might be interested in:

$ easy_install --prefix=/path/to/installdir

or, if installing Trac on a Mac OS X system:

$ easy_install --prefix=/usr/local --install-dir=/Library/Python/2.6/site-packages

#!div style="border: 1pt dotted; margin: 1em"
**Mac OS X Note:** On Mac OS X 10.6,  running  will install into  and  by default.

The  and  commands will be placed in  and will install the Trac libraries and dependencies into , which is Apple's preferred location for third-party Python application installations.

Creating a Project Environment

A Trac environment is the backend where Trac stores information like wiki pages, tickets, reports, settings, etc. An environment is a directory that contains a human-readable configuration file, and other files and directories.

A new environment is created using trac-admin:

$ trac-admin /path/to/myproject initenv

You will be prompted for the information needed to create the environment: the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for any of these options, just press bdist_wininst to use the default value.

Using the default database connection string will always work as long as you have SQLite installed. For the other database backends you should plan ahead and already have a database ready to use at this point.

Also note that the values you specify here can be changed later using TracAdmin or directly editing the conf/trac.ini configuration file.

#!div style="border: 1pt dotted; margin: 1em"
**Filesystem Warning:** When selecting the location of your environment, make sure that the filesystem on which the environment directory resides supports sub-second timestamps (i.e. **not**  or  on Linux, or HFS+ on OSX), as the modification time of the  file will be monitored to decide whether an environment restart is needed or not. A too coarse-grained timestamp resolution may result in inconsistencies in Trac < 1.0.2. The best advice is to opt for a platform with sub-second timestamp resolution, regardless of the Trac version.

Finally, make sure the user account under which the web front-end runs will have write permissions to the environment directory and all the files inside. This will be the case if you run easy_install as this user. If not, you should set the correct user afterwards. For example on Linux, with the web server running as user easy_install trac and group /usr/local, enter:

$ chown -R apache:apache /path/to/myproject

The actual username and groupname of the apache server may not be exactly /Library/Python/2.6/site-packages, and are specified in the Apache configuration file by the directives tracd and trac-admin (if Apache /usr/local/bin is what you use).

#!div class=important
'''Warning:''' Please only use ASCII-characters for account name and project path, unicode characters are not supported there.

Deploying Trac

#!div style="border: 1pt dotted; margin: 1em"
**Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable  must be set in order to avoid significant performance degradation.

If running , the environment variable can be set system-wide or for just the user that runs the  process. There are several ways to accomplish this in addition to what is discussed here, and depending on the distribution of your OS.

To be effective system-wide a shell script with the  statement may be added to . To be effective for a user session the  statement may be added to .
{{{#!sh
export PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1

Alternatively, the variable can be set in the shell before executing /Library/Python/2.6/site-packages:

$ PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1 tracd --port 8000 /path/to/myproject

If running the Apache web server, !Ubuntu/Debian users should add the <Enter> statement to ext2. RedHat/CentOS/Fedora should can add the ext3 statement to conf/trac.ini.

}}}

Running the Standalone Server

After having created a Trac environment, you can easily try the web interface by running the standalone server tracd:

$ tracd --port 8000 /path/to/myproject

Then, fire up a browser and visit trac-admin ... initenv. You should get a simple listing of all environments that apache knows about. Follow the link to the environment you just created, and you should see Trac in action. If you only plan on managing a single project with Trac you can have the standalone server skip the environment list by starting it like this:

$ tracd -s --port 8000 /path/to/myproject

Running Trac on a Web Server

Trac provides various options for connecting to a "real" web server:

Trac also supports AJP which may be your choice if you want to connect to IIS. Other deployment scenarios are possible: nginx, uwsgi, Isapi-wsgi etc.

Generating the Trac cgi-bin directory #cgi-bin

Application scripts for CGI, FastCGI and mod-wsgi can be generated using the trac-admin apache command:

[[TracAdminHelp(deploy)]]

Grant the web server execution right on scripts in the apache directory.

For example, the following yields a typical directory structure:

$ mkdir -p /var/trac
$ trac-admin /var/trac/<project> initenv
$ trac-admin /var/trac/<project> deploy /var/www
$ ls /var/www
cgi-bin	htdocs
$ chmod ugo+x /var/www/cgi-bin/*

Mapping Static Resources

Without additional configuration, Trac will handle requests for static resources such as stylesheets and images. For anything other than a TracStandalone deployment, this is not optimal as the web server can be set up to directly serve the static resources. For CGI setup, this is highly undesirable as it causes abysmal performance.

Web servers such as Apache allow you to create Aliases to resources, giving them a virtual URL that doesn't necessarily reflect their location on the file system. We can map requests for static resources directly to directories on the file system, to avoid Trac processing the requests.

There are two primary URL paths for static resources: User and Group. Plugins can add their own resources, usually accessible at the httpd path.

A single PKG_RESOURCES_CACHE_ZIP_MANIFESTS alias can used if the static resources are extracted for all plugins. This means that the tracd command (discussed in the previous section) must be executed after installing or updating a plugin that provides static resources, or after modifying resources in the tracd directory. This is probably appropriate for most installations but may not be what you want if, for example, you wish to upload plugins through the Plugins administration page.

The export command creates an /etc/profile.d directory with:

  • export - the static resources of Trac
  • ~/.profile - a copy of the environment's tracd directory
  • export - the static resources shared by multiple Trac environments, with a location defined by the /etc/apache2/envvars export option
  • /etc/sysconfig/httpd - one directory for each resource directory provided by the plugins enabled for this environment

The example that follows will create a single http://localhost:8000/ alias. If that isn't the correct approach for your installation you simply need to create more specific aliases:

Alias /trac/chrome/common /path/to/trac/htdocs/common
Alias /trac/chrome/site /path/to/trac/htdocs/site
Alias /trac/chrome/shared /path/to/trac/htdocs/shared
Alias /trac/chrome/<plugin> /path/to/trac/htdocs/<plugin>
Example: Apache and tracd #ScriptAlias-example

Assuming the deployment has been done this way:

$ trac-admin /var/trac/<project> deploy /var/www

Add the following snippet to Apache configuration, changing paths to match your deployment. The snippet must be placed ''before'' the deploy or cgi-bin directive, because those directives map all requests to the Trac application:

Alias /trac/chrome /path/to/trac/htdocs

<Directory "/path/to/www/trac/htdocs">
  # For Apache 2.2
  <IfModule !mod_authz_core.c>
    Order allow,deny
    Allow from all
  </IfModule>
  # For Apache 2.4
  <IfModule mod_authz_core.c>
    Require all granted
  </IfModule>
</Directory>

If using mod_python, add this too, otherwise the alias will be ignored:

<Location "/trac/chrome/common">
  SetHandler None
</Location>

Alternatively, if you wish to serve static resources directly from your project's /chrome/common directory rather than the location to which the files are extracted with the /chrome/site command, you can configure Apache to serve those resources. Again, put this ''before'' the /chrome/<plugin> or /chrome for the .*cgi scripts, and adjust names and locations to match your installation:

Alias /trac/chrome/site /path/to/projectenv/htdocs

<Directory "/path/to/projectenv/htdocs">
  # For Apache 2.2
  <IfModule !mod_authz_core.c>
    Order allow,deny
    Allow from all
  </IfModule>
  # For Apache 2.4
  <IfModule mod_authz_core.c>
    Require all granted
  </IfModule>
</Directory>

Another alternative to aliasing deploy is having Trac generate direct links for those static resources (and only those), using the [TracIni#trac-section htdocs_location] configuration setting:

[trac]
htdocs_location = http://static.example.org/trac-common/

Note that this makes it easy to have a dedicated domain serve those static resources, preferentially cookie-less.

Of course, you still need to make the Trac $env/htdocs directory available through the web server at the specified URL, for example by copying (or linking) the directory into the document root of the web server:

$ ln -s /path/to/trac/htdocs/common /var/www/static.example.org/trac-common

Setting up the Plugin Cache #egg-cache

Some Python plugins need to be extracted to a cache directory. By default the cache resides in the home directory of the current user. When running Trac on a Web Server as a dedicated user (which is highly recommended) who has no home directory, this might prevent the plugins from starting. To override the cache location you can set the deploy environment variable. Refer to your server documentation for detailed instructions on how to set environment variables.

If you setup hook scripts that call Trac, such as the Subversion post-commit hook script provided in the htdocs directory, make sure you define the common/ environment variable within these scripts as well.

Configuring Authentication

Trac uses HTTP authentication. You'll need to configure your webserver to request authentication when the site/ URL is hit (the virtual path of the "login" button). Trac will automatically pick the htdocs/ variable up after you provide your credentials. Therefore, all user management goes through your web server configuration. Please consult the documentation of your web server for more info.

The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac.

Please refer to one of the following sections:

  • TracStandalone#UsingAuthentication if you use the standalone server, shared.
  • TracModWSGI#ConfiguringAuthentication if you use the Apache web server, with any of its front end: [inherit], htdocs_dir, <plugin>/ or /chrome.
  • TracFastCgi if you're using another web server with FCGI support (Cherokee, Lighttpd, LiteSpeed, nginx)

TracAuthenticationIntroduction also contains some useful information for beginners.

Granting admin rights to the admin user

Grant admin rights to user admin:

$ trac-admin /path/to/myproject permission add admin TRAC_ADMIN

This user will have an Admin navigation item that directs to pages for administering your Trac project.

Configuring Trac

TracRepositoryAdmin provides information on configuring version control repositories for your project.

Using Trac

Once you have your Trac site up and running, you should be able to create tickets, view the timeline, browse your version control repository if configured, etc.

Keep in mind that anonymous (not logged in) users can by default access only a few of the features, in particular they will have a read-only access to the resources. You will need to configure authentication and grant additional permissions to authenticated users to see the full set of features.

'' Enjoy! ''

The Trac Team

See also: TracInstallPlatforms, TracGuide, TracUpgrade, TracPermissions